Weddings are one of the most deserving and difficult occasions to
photograph. Lighting, distance from the subjects and lots of movement
are all challenges with wedding photography. So, here are 8 wedding photography tips you can use to help make sure that your wedding pictures are just what you (and the bride and groom) want.
–
This is especially true for digital cameras since digital uses far more
power than film cameras. And if like most guests with digital cameras
you’re showing your pictures to others at the wedding and reception,
that LCD will zap the power even more. So bring lots (and I mean lots)
of extra batteries.
– You never know which pictures will end up
being the ones you want to frame or make prints of for the photo album,
so be sure that your camera is set to medium or better yet, high
resolution. Having extra memory cards will help make sure you don’t run
out of space.
– In addition to all of the traditional moments you
need to take like the bride and groom getting ready, exchange of vows,
the first kiss, there will always be the unexpected “Kodak moments” that
you want to capture. Along with all the traditional moments that you
don’t want to miss: the bride (or groom) getting ready, the exchange of
vows, the first kiss, the cake cutting ceremony and so on, there are
bound to be many unexpected “Kodak moments.” Watch the children as they
will provide many sweet and comical photo ops at a wedding! And don’t
forget to honor the parents of both the bride and groom by taking their
pictures. There will be much emotion on this joyous day to capture with
your camera.
– If you have a film camera, use a higher speed film,
such as 400, but if you have a digital camera like most will, increase
the camera’s ISO, that is its sensitivity to light. Try increasing just
to 200 or 400. Use digital noise removing software if needed. The higher
ISO can brighten otherwise underexposed pictures better than a
compact’s built in flash.
– Most wedding pictures are taken from too far a distance for the camera’s red eye reduction to work, but photo editing software such as Photoshop and even the free, Picasa can take the red out.
–
Since it can take a while for the flash to recharge- plan ahead. Unless
a “can’t miss” spontaneous photo opportunity comes up, save the flash
for moments you most want to have pictures of, like the bride and groom
cutting the cake, kissing after their vows, their first dance, etc.
–
For those far away photos, use the optical zoom (not digital zoom if
you can). If your camera doesn’t have an optical zoom, it’s best to
simply move closer to the subject.
Although this isn’t a problem with film, if you’re taking photos with
a digital camera be prepared to compensate for the shutter lag. Some
cameras shoot much faster (or slower) than others, so if you haven’t
done so yet, get acquainted with yours before the wedding. When taking
action shots such as dancing at the reception, do the same as you would
at a sports event. Try to guess what’s going to happen next and point
the camera in that direction and press the shutter half way down. Be
ready to take lots of photos anytime there are people moving, so that
you end up with several good pictures. And on such an important event,
it’s important to take several still shots as well.
Hopefully
these 8 wedding photo tips will help you make the most out of your next
wedding and give the bride and groom pictures they adore. Until then,
keep practicing and have fun learning photography!